The DX-format is the smaller sensor at 24x16mm; the larger full frame FX-format sensor measures 36x24mm which is approximately the same size as 35mm film. Different NIKKOR lenses are designed to accommodate the different camera sensor sizes. DX cameras with smaller sensors are optimized for corresponding DX lenses.
Hereof, What does D and G mean on Nikon lens? The main difference between the D and G lenses are their ages. The D lenses are the older lenses that were created for SLR cameras that do not have certain features. The G lenses were created to compliment more modern SLR cameras that have more advanced features.
What is the difference between AF and AF-S Nikon lenses? There are two types of Nikon lenses: AF (auto focus) and AF-S (auto focus with silent wave motor). AF are generally the older lenses that will only work in the manual mode. AF-S lenses work on all Nikon digital cameras, and have a fast and silent autofocus.
Accordingly, What does N mean on Nikon lens? N – The letter “N” stands for Nano Crystal Coat and it is always displayed in a golden sticker on all top of the line Nikon lenses. It is a special type of glass coating that. PC-E – Perspective Control with electronic diaphragm. Allows lenses to tilt and shift to create special effects. RF – Rear Focusing.
What is the difference between AF and AF-S?
The difference between these lenses is that AF-S / AF-I lenses contain a focusing motor built into the lens, rather than using the auto focus motor built into the camera body. This system enables faster focusing and in the case of the AF-S lenses near silent auto focusing.
What does A and M mean on Nikon lens? “On the side of some lenses is a switch that offers an MA or M setting. It means the lens allows switching from autofocus to manual with virtually no time lag; you can switch without making any settings on the camera.
What does D mean on Nikon lens? On older NIKKORS you may see the letter D, and that means distance information is factored into the metering process.
What does AF-S and AF-P mean? AF-S is universal, as it refers to the silent wave focusing system, and should work with all autofocus capable cameras. AF-P requires a camera which provides camera body powered focusing, which is only in the higher end Nikons, like the D7100/D7200.
Will my old Nikon lens work on a DSLR?
Nikon. Nikon have kept the same “F mount” coupling for nearly 60 years, so just about all lenses will fit (although they may not do everything), only introducing a new, bigger “Z mount” for Nikon mirrorless cameras in 2018.
What does MC mean on Nikon lens? NIKKOR Micro Lens information
| Lens | Reproduction Ratio | Closest Focus |
|---|---|---|
| NIKKOR Z MC 50mm f/2.8 | 1:1 | 16 cm |
| NIKKOR Z MC 105mm f/2.8 VR S | 1:1 | 29 cm |
| AF-S DX Micro-NIKKOR 40mm f/2.8G | 1:1 | 16 cm |
| AF Micro-NIKKOR 60mm f/2.8D | 1:1 | 22 cm |
• Oct 19, 2016
What is the difference between NIKKOR and Nikon lenses?
But one thing is easy enough to remember: Nikon lenses are all branded Nikkor, the name of the company’s lens subsidiary. These lenses come in all kinds of shapes and sizes and have a huge range of uses, but anything labeled “Nikkon” was made by and is supported by Nikon.
What is an AF-D lens? AF-D – Auto Focus with Distance information. Same as AF, except it can report the distance between the subject and the lens and then reports that information to the camera.
What is the difference between AI and AiS Nikon lenses?
Ai lenses have only ONE set of aperture values on them, while AiS lenses have two sets of aperture numbers….a big-sized set, and behind them and closer to the body is a smaller,secondary set of numbers called the ADP or Aperture DIrect Readout set….
What is VR in lens?
Vibration Reduction (VR) is an image stabilization technology that minimizes blur caused by camera shake. Using a VR NIKKOR lens can result in sharp images in low light, under windy conditions or when using a physically large NIKKOR lens.
What is the meaning of 50mm? 50 mm refers to the focal length of a lens. By itself, 50 mm means 50 millimeters, which is about 2 inches. In terms of photography, this measure is a general description of how much magnification a lens will have.
What does AE l mean Nikon? AE means auto exposure, AE-L is the auto exposure lock. AF stands for autofocus, so AF-L is the auto focus lock.
What does S stand for in AF-S?
In the past, Nikon’s two most popular modes were called Continuous Servo AF and single area AF. Nowadays, they are called AF-C (short for auto focus continuous) and AF-S (short for auto focus single). Many Nikon models also have AF-Aand MF (manual focus) modes to choose from as well.
What is the difference between 1.8 g and 1.8 D? The 50mm f/1.8G lens is the newer version of the aging 50mm f/1.8D. It’s more expensive, has some slight updates to the optical quality which will attract more picky buyers, and includes features typical of higher-end lenses such as a silent-wave motor, rounded aperture blades, and decent build quality.
What is the difference between AF-C and AF-S?
AF-C (AF-continuous or servo mode) is used for photographing moving subjects. AF-S means single shot and is used for subject that is stationary. AF-A is where the camera decides whether the subject is moving or not and tries to alternate between the servo and single shot mode accordingly.
What is an aperture ring? The aperture ring on a lens allows the photographer to control the aperture within the lens. These settings are marked on the lens using f/stops. On automatic cameras, the aperture can only be controlled through the camera body’s f/stop settings.
Discussion about this post