Probably not. The Canon extenders have a protruding front element that may interfere with the rear element of the lens. Apart from that an 18-270 lens is not a good starting point for an extender. You’ll loose a lot of quality, probably autofocus as well.
In the same way Which Nikon teleconverter is best?
Which Nikon teleconverter is the best? Based on heavy field use of all three Nikon teleconverters, the TC-14E III is currently our top recommended teleconverter. It has very little impact on image quality, and it works well with most Nikon telephoto and super-telephoto lenses.
Subsequently, Can you use a Sigma teleconverter with a Tamron lens? The Sigma 1.4 teleconverter is a non-reporting converter so the camera will treat the combination as if only Tamron 150-600mm is used.
Can I use a Canon Extender on a Sigma lens?
The tape will not ever come loose no matter how many times you attach and de-attach the lens, so don’t worry. This particular contact is for Sigma cameras only, so if you are using a Canon or (probably) any other brand) this will work as well. This will make your Canon tele-extender work with the Sigma lenses.
What lenses does the Canon 2x Extender work with?
It works with 70-200s and the 100-400, 135/2 and 180/3.5 macro, and otherwise is optimized for Canon’s big white supertelephoto lenses. It wont work well or at all with f/5.6 zooms or normal 50mm, 85mm or 100mm lenses.
Can I use a teleconverter on a zoom lens?
In general, wide-angle prime and zoom lenses are not compatible with teleconverters; which makes sense, since you’re using a teleconverter to increase your reach—and you’d likely start out with a longer focal length lens to begin with.
Can a Nikon 200 500 use a teleconverter?
The Nikon 200-500mm f/5.6E VR does not have such issues, because of its brighter maximum aperture of f/5.6 at all focal lengths, which is why the lens is actually suitable to use with the 1.4x teleconverter.
Are teleconverters worth it?
While teleconverters give you decent image quality, they still cause the photos to lose some of it. However, they are still much better than cropping the image, and they preserve way more quality than cropping. This probably goes without saying, bit when you’re using a longer lens, there’s more camera shake.
What cameras are Sigma lenses compatible with?
The Sigma DC lenses are specifically designed for APS-C SLRs such as the Canon Rebel Series XT, XSI, T5, T6, T1i, T2i, T3i, T4i, T5i, T6i and the EOS 7D, 7D Mark II, 40D, 50D, 60D, 70D, 80D and others. The Sigma DG lenses are designed to be used with either full format sensor SLRs or APS-C SLRs.
Can I use Nikon teleconverter with Sigma lens?
It turns out that teleconverters are very brand-specific. Nikon teleconverters are designed to only work well with Nikkor lenses, while Sigma teleconverters are designed to only work well with Sigma lenses.
What is a tele conversion lens?
A teleconverter allows you to increase the apparent focal length of a lens, giving you a greater telephoto effect than a lens alone. A teleconverter is basically a magnifying lens that is placed between the camera body and lens. … Nikon currently offers teleconverters in 1.4x, 1.7x and 2x magnifications.
Will a teleconverter work with Sigma lens?
Lens Compatibility
Nikon teleconverters are designed to only work well with Nikkor lenses, while Sigma teleconverters are designed to only work well with Sigma lenses. So if you were thinking of buying a Sigma 1.4x teleconverter to be used for a Nikon telephoto or super-telephoto lens – forget about it.
Are lens extenders worth it?
While teleconverters give you decent image quality, they still cause the photos to lose some of it. However, they are still much better than cropping the image, and they preserve way more quality than cropping. This probably goes without saying, bit when you’re using a longer lens, there’s more camera shake.
Which Canon Extender is the best?
1. Canon Extender EF 1.4x III (Overall Winner) The Canon Extender EF 1.4x III is a commonly used unit for the Canon EF mount, extending the focal length by a 1.4x factor. Canon’s own offering in this department ensures the best quality glass, along with the best communication between lens and camera.
What is the difference between Canon Extender II and III?
Results with the Extender 2x III are overall slightly sharper than the Extender 2x II with a difference being most noticeable in the mid-frame and corner areas. The 2x II added pincushion distortion to the lens it was used with whereas the 2x version III adds slight barrel distortion.
What is the main disadvantage of a teleconverter?
The main downside of teleconverters is a loss of lens speed, which is directly related to the magnification factor of the teleconverter. A 1.4x teleconverter will reduce the maximum aperture of the lens by a full f-stop, while a 2x teleconverter cuts it by two full stops.
What is a 1.4 teleconverter?
A 1.4x teleconverter is a small lens that mounts between a compatible lens and a camera, increasing the focal length or focal length range of the lens by a factor of 1.4x, a very noticeable amount.
Do extension tubes increase magnification?
The extension tube serves to increase the distance between the lens and the sensor. This allows the lens to focus closer and, therefore, increase magnification, so you can use almost any lens for close-up photography. As with a macro lens, the longer the focal length, the greater the working distance you can achieve.
How heavy is the Nikon 200 500mm lens?
AF-S NIKKOR 200-500mm f/5.6E ED VR
| Focal length | 200-500 mm |
|---|---|
| Weight |
Approximately 2300 g/5 lb 1.2 oz (including tripod collar), approx. 2090 g/4 lb 9.8 oz (without tripod collar) |
| Supplied accessories | LC-95 95 mm snap-on Front Lens Cap, LF-4 Rear Lens Cap, HB-71 Bayonet Hood, CL-1434 Lens Case |
What is the sweet spot for Nikon 200-500?
The 200-500 delivered superb sharpness. The sharpest images were obtained from f/5.6 to 11 with the sweet spot at f/8. This is very important because the dark environments in the wild can sometimes force you to use the lens wide-open. In this case, this Nikkor will not disappoint you even a bit.
Is using a teleconverter better than cropping?
Your images will have lower contrast
Finally, using a teleconverter will tend to lower the contrast in your images when compared to images taken without one. However, it goes deeper than just the final image. This reduced contrast can also affect your autofocus since your camera uses areas of contrast to achieve focus.
What does a 1.4 extender do?
Use of a 1.4x extender (any brand or model of them) decreases/narrows your lens’ max aperture setting by 1 stop – allowing at most 1/2 as much light into the exposure. The lens aperture still opens to the same physical diameter, but the ratio of the aperture opening to the focal length is reduced – by 1 stop.
How are teleconverters calculated?
The easiest way to figure how much a teleconverter (TC) increases the f-number without doing any complex math is to do this: Take the linear magnifying power of the teleconverter and compare it to how many stops away from “1” it is on the f-number scale. ¹ That’s how many stops you lose.
Don’t forget to share this post with your friends !
Discussion about this post