Meaning: the printer is out of paper / No paper. Solution: Reload paper in the rear tray and press the Resume / Cancel button. Meaning: the paper exit tray is closed / Paper jam. Solution: the paper is jammed.
Also, How do I connect my phone to my Canon printer?
Open the Canon print app. On the main screen, tap the ADD PRINTER icon, tap REGISTER PRINTER then tap PRINTER SETUP. Tap CONNECT VIA WIRELESS ROUTER. A screen will prompt you to connect your device’s Wi-Fi to the Canon IJ setup network.
Beside above Where is the reset button on a Canon Pixma printer? The reset procedure of the Canon printer is very simple. Find the Stop button on the control panel of the printer. Press the Stop button and hold it for a few seconds. Do not release it until the Orange color Alarm lamp blinks 21 times.
How do I clear a Canon printer error?
Reset the Canon printer
- Switch on the printer.
- Press and hold the Stop/reset button.
- Press the button that you use to make a color copy and hold it down.
- Wait 5 seconds. …
- The printer now reboots and sets itself up.
- Does the printer indicate that the device needs to be calibrated? …
- You’ve reset your printer.
Why won’t my Canon printer connect to my phone?
Disconnect the data cable from the printer (not applicable to Wi-Fi®, Bluetooth® or Infrared). Unplug the printer power cord for approximately 10 minutes, and then plug it back in. To troubleshoot a communication issue, reconnect the data cable (not applicable to Wi-Fi, Bluetooth or Infrared).
How do I troubleshoot my Canon Pixma printer?
How to troubleshoot network communication issues with the printer
- Make sure that the printer is not displaying any errors (flashing lights or error codes on the screen). …
- If there have been no changes to your wireless network (new router, new password for your router, etc.), turn off and unplug your printer.
Why is my Canon Pixma printer not responding?
The major reason behind this issue is communication failure between the Canon printer and the computer. … Turn on your Canon printer and press the Setup button on the operator panel to solve the Canon Pixma printer not responding. Scroll the Setup screen and select the Wireless LAN setup option.
How do you reset your Canon printer?
1 Factory Reset
- Press Setup.
- Press the arrow buttons until you navigate to Device settings and then press OK.
- Press the arrow buttons until you navigate to Reset setting and then press OK.
- Press the arrow buttons until you navigate to Reset all and then press OK.
- Select Yes.
- Press OK. Your device is now reset.
Why does my Canon printer keep saying error printing?
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you’re trying to print. The loading bay for your paper might have become lodged with paper or you’re using the wrong type of paper.
How do I troubleshoot my Canon printer?
Go to your computer’s “Control Panel” section and then tap on the “Printers and Faxes” option. Click on “Add A Printer” button if your Canon printer isn’t showing up in the list. Follow the on-screen instructions so that your computer will run a test to try to detect the printer.
Can’t connect to Canon wireless printer?
Check your printer for the WiFi network; it should be turned ON. Check your computer/laptop wi-fi settings; wi-fi connections shouldn’t be restricted. Ensure the same printer is added into your computer and “Set as Default.” Ensure sure your PC isn’t in airplane mode; if yes turn it OFF.
Why isn’t my computer connecting to my wireless printer?
Make sure the printer is on or that it has power. Connect your printer to your computer or other device. Check the printer’s toner and paper, plus the printer queue. … If you recently updated your browser, security software, operating system or firewalls, it could cause issues connecting to your printer.
Why can’t I get my Canon printer to print wirelessly?
my Canon printer won’t print wirelessly
The solution is to restart the Canon PIXMA printer, system, and the wireless router. Turn the Canon PIXMA printer On and do not continue for ten seconds. Remove the power cable from the printer’s rear to solve the Canon printer won’t print wirelessly issue.
How do I run a diagnostic on my Canon printer?
Go to your computer’s “Control Panel” section and then tap on the “Printers and Faxes” option. Click on “Add A Printer” button if your Canon printer isn’t showing up in the list. Follow the on-screen instructions so that your computer will run a test to try to detect the printer.
Why is my printer connected but not printing?
My printer won’t print
Make sure there is paper in the tray(s), check the ink or toner cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi. And if it is a network or wireless printer, try using a USB cable instead.
Why won’t my Canon printer connect to the Internet?
Check your printer for the WiFi network; it should be turned ON. Check your computer/laptop wi-fi settings; wi-fi connections shouldn’t be restricted. Ensure the same printer is added into your computer and “Set as Default.” Ensure sure your PC isn’t in airplane mode; if yes turn it OFF.
Why my wireless Canon printer is not printing?
Printer is not responding
The computer and access point (or wireless router) have lost connection. Restart the computer and then attempt to print again. The printer’s signal strength is low due to its distance from the access point (or wireless router). Move the printer closer to the access point (or wireless router).
Why is my wireless printer not responding to my computer?
If your printer fails to respond to a job: Check that all printer cables are connected properly and be sure that the printer is turned on. If everything is connected properly and powered up, go to the computer’s “control panel” from the “start” menu. … Cancel all documents and try printing again.
Why is the printer not printing?
My printer won’t print
Make sure there is paper in the tray(s), check the ink or toner cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi. And if it is a network or wireless printer, try using a USB cable instead.
Why is my Canon printer not printing wirelessly?
my Canon printer won’t print wirelessly
The solution is to restart the Canon PIXMA printer, system, and the wireless router. Turn the Canon PIXMA printer On and do not continue for ten seconds. Remove the power cable from the printer’s rear to solve the Canon printer won’t print wirelessly issue.
Why is my Canon printer not connecting to WiFi?
Check your printer for the WiFi network; it should be turned ON. Check your computer/laptop wi-fi settings; wi-fi connections shouldn’t be restricted. Ensure the same printer is added into your computer and “Set as Default.” Ensure sure your PC isn’t in airplane mode; if yes turn it OFF.
Why won’t my computer recognize my Canon printer?
Turn OFF the printer. The printer may not be recognized if you install the printer driver with the printer turned ON. … First delete the USB class driver, and then reinstall the printer driver. Delete the USB class driver when it is not possible to install the printer driver correctly when using a USB connection.
Why is my wireless Canon printer not printing?
The wireless printer not responding issue occurs when the Canon printer has lost the communication with the laptop or computer. Power off your Canon printer and wait for about twenty seconds. Unplug the electrical cord from the rear side of your Canon device and then switch off the Mac or Windows system.
What is the WPS button on a printer?
Some access points (often called routers or hubs) feature an automatic connection button labelled “WPS” which stands for Wi-Fi Protected Setup and allows permitted devices to connect to your network without needing to enter a password.
How do I reset my Canon wireless printer?
1 Factory Reset
- Press Setup.
- Press the arrow buttons until you navigate to Device settings and then press OK.
- Press the arrow buttons until you navigate to Reset setting and then press OK.
- Press the arrow buttons until you navigate to Reset all and then press OK.
- Select Yes.
- Press OK. Your device is now reset.
Discussion about this post