Why can’t I access my Seagate external hard drive?

A reason why your Seagate portable drive is not being recognized could be that you might have plugged it into a faulty or loose USB port. … Your Seagate portable drive may not be showing up because of a faulty USB cable as well; so you can replace the USB cable if changing the port doesn’t work.

Also, Why won’t Windows 10 recognize my external hard drive?

If the external hard drive is not showing up in Windows 10, it may be caused by the incompatible file system format. If there is no data on the drive, you can right-click the partition on the drive in Disk Management and select Format to format the drive to NTFS. But this will lost all data.

Beside above How do I fix a corrupted Seagate external hard drive? How to fix a corrupted external hard drive WITHOUT formatting

1. On the desktop, open This PC (My Computer) and select the desired external hard drive. Right-click it and select Properties -> Tools -> Click on Check. …
2. Use chkdsk.
3. Use Disk Management. …
4. Use diskpart.

How do I fix Seagate external hard drive not detected?

Basic hardware troubleshooting steps:

1. Try connecting the drive to a different port on the computer.
2. If possible, try using a different cable.
3. Try using the drive on a different computer.
4. Verify the drive light is on. …
5. Try a different power outlet.

Why can’t I access my external hard drive?

But in some cases, you may connect your drive to a Windows PC or another device with a USB port and find the external hard drive isn’t showing up. This problem has several possible causes: partition issues on the external drive, using the wrong file system, dead USB ports, or driver issues in Windows.

Why can’t I see my external hard drive?

If the drive still isn’t working, unplug it and try a different USB port. It’s possible the port in question is failing, or just being finicky with your specific drive. If it’s plugged into a USB 3.0 port, try a USB 2.0 port. If it’s plugged into a USB hub, try plugging it directly into the PC instead.

Why do Seagate hard drives fail?

Why do Seagate mechanical hard drives have higher failure rates than those of HGST, Toshiba, and Western Digital? – Quora. As to the drives that Backblaze reported on (model ST3000DM0001) the issue related mostly to a firmware glitch relating to the media cache as well as the bad sector auto-reallocation function.

How long does a Seagate hard drive last?

The simplest answer is that they can run smoothly for three to five years. This means any HDD, whether it’s external or inside of a system.

How do you reset a Seagate external hard drive?

Reset using the button

1. Power down the Seagate Central by unplugging it from power.
2. Wait approximately 15 seconds.
3. Power up the Seagate Central again.
4. Wait for the device to fully boot and show a steady, non-blinking green light. This takes about three to four minutes. …
5. Wait until the light becomes solidly illuminated.

How do I know if my Seagate external hard drive is working?

The Windows Operating System has a great tool for testing hard drives. This program is called Check Disk (ChkDsk).
…
To get to First Aid:

1. Click on the partition to select it. …
2. Click on the First Aid tab.
3. Click on “Verify Disk” and if Disk Utility says it’s needed, then run “Repair Disk”.

Why can I not access my external hard drive?

But in some cases, you may connect your drive to a Windows PC or another device with a USB port and find the external hard drive isn’t showing up. This problem has several possible causes: partition issues on the external drive, using the wrong file system, dead USB ports, or driver issues in Windows.

How do I fix my external hard drive not responding?

You can follow these steps to fix the problem with your hard drive.

1. Inspect Hard Drive. Carefully inspect your hard disk for any physical damage. …
2. Run CHKDSK. …
3. Use an Antivirus & Anti-Malware Tool. …
4. Re-Install the Drivers. …
5. Format the Disk.

How do I reset my external hard drive?

To reformat a drive on Windows:

1. Plug in the drive and open Windows Explorer.
2. Right-click the drive and choose Format from the drop-down menu.
3. Select the file system you want, give your drive a name under Volume label, and make sure the Quick Format box is checked.
4. Click Start, and the computer will reformat your drive.

How do I fix Windows not recognizing my external hard drive?

What to Do When Your External Hard Drive Won’t Show Up

1. Make Sure It’s Plugged In and Powered On. …
2. Try Another USB Port (or Another PC) …
3. Update Your Drivers. …
4. Enable and Format the Drive in Disk Management. …
5. Clean the Disk and Start From Scratch. …
6. Remove and Test the Bare Drive. …
7. Our Favorite External Hard Drives.

How do I fix my Seagate external hard drive not detected?

Basic hardware troubleshooting steps:

1. Try connecting the drive to a different port on the computer.
2. If possible, try using a different cable.
3. Try using the drive on a different computer.
4. Verify the drive light is on. …
5. Try a different power outlet.

Can external hard disk be repaired?

Generally speaking, the external hard drive errors can be repaired using CMD. What you should note is that regarding “chkdsk f: /f “, the first f should be replaced with the drive letter of the external hard drive.

How can I recover data from a dead hard drive?

To Recover Deleted Data from a Damaged Hard Drive:

1. Download & Install Disk Drill on your computer.
2. Select your hard drive & click the ‘Recover’ button.
3. Preview files.
4. Select & save your files.

Is WD more reliable than Seagate?

It found that Western Digital’s drives were overall the least reliable. … Toshiba had an annual failure rate of nearly 3.5 percent, Seagate ranked in at slightly more than that but still under 4 percent, and Western Digital topped the charts at just under 7 percent.

What to do if Seagate hard drive stops working?

USB External Troubleshooter

1. Try connecting the drive to a different port on the computer.
2. If possible, try using a different cable.
3. Try using the drive on a different computer.
4. Verify the drive light is on. …
5. Try a different power outlet.

How often do Seagate drives fail?

The failure rate on many Seagate drives is simply abominable, from 9.5% on certain 1.5TB drives to 23.5% on the old 7200.11 series, to a whopping 43.1% on the Seagate 7200.14 drive family of 3TB products.

Can a hard drive last 10 years?

—is that the average hard disk lasts somewhere between 3 and 5 years before it will fail and need to be replaced. Some will last beyond 10 years, but these are the outliers. When an HDD fails, it will not be repairable without great expense, and so the data stored upon it will very likely be lost forever.

Is it OK to leave external hard drive plugged in all the time?

Just leaving a USB external drive plugged in will not harm the drive. A backup drive connected to the system runs the same risk of destruction or corruption as the drive it is backing up.

Can you recover data from a dead hard drive?

But either way, recovery is possible. To make sure it’s the hard drive and not one of the many other things that can go wrong when starting up a computer, if possible, remove the hard drive and plug it into another computer. … A Universal Drive Adapter will help you recover data from most hard drives.

Do Seagate drives fail?

The failure rate on many Seagate drives is simply abominable, from 9.5% on certain 1.5TB drives to 23.5% on the old 7200.11 series, to a whopping 43.1% on the Seagate 7200.14 drive family of 3TB products. … Many of Seagate’s problems, however, appear to be in the 1.5TB to 3TB range.

Can I reset my external hard drive?

Reformatting your drive in Windows

Right-click the drive and choose Format from the drop-down menu. Select the file system you want, give your drive a name under Volume label, and make sure the Quick Format box is checked. Click Start, and the computer will reformat your drive.