What does it mean when your iPhone screen is black but still works?

If you’re stuck where the screen is black but the iPhone still works, a potential reason for this to be happening could be because of a software issue. This problem usually suggests that the iPhone is frozen or is crashing. Luckily what you can do here is reboot your device.

In the same way How do I fix black and unresponsive iPhone screen?

If your screen is black or frozen

1. Press and quickly release the volume up button.
2. Press and quickly release the volume down button.
3. Press and hold the side button until you see the Apple logo.
4. If your phone doesn’t turn on, follow these steps to check your hardware and charge your phone.

Subsequently, How can I open my iPhone If the screen is black?
First solution: Force your iPhone X to restart.

1. Press and quickly release the Volume Up button.
2. Press and quickly release the Volume Down button.
3. Press and hold the Side/Power button until the Apple logo appears.

How do I hard reset my iPhone 7?

How to Force Restart (Hard Reset) iPhone 7

1. Hold down the Volume Down button on the left side of the device and the Sleep/Wake button on the right side of the device at the same time.
2. Now, hold the buttons for approximately 10 seconds until the screen goes dark and an Apple logo appears on the screen.

How do I restart my iPhone without using the screen?

1.


How to Restart iPhone 6 and Old Models without Screen

1. Hold down the ‘Power’ button and ‘Home’ button simultaneously until the Apple logo glows on screen.
2. As soon as you see the Apple logo, you need to lift your fingers from the iPhone buttons.
3. Allow your iPhone to restart on its own.

What is the cause of the black screen of death?

The notorious black screen of death (BSOD) can occur for a variety of reasons including overheating, update issues, a power supply issue and software or driver errors. Fortunately, you can repair it in most cases. If it happens more frequently, then you might have a hardware issue and should take it into a repair shop.

How do I factory reset my iPhone 7 without a computer?

Part 1.


Factory Reset an iPhone Without a Computer via Settings

1. Go to the Settings app > General > Reset > Erase All Content and Settings. …
2. The process will take a couple of minutes to complete. …
3. Open Safari or any browsers on any of your device > Enter icloud.com > Log in with your Apple ID and password.

How do I get my iPhone 7 out of recovery mode?

To exit recovery mode – simply hold down the sleep/wake and the volume-down buttons again, and keep holding until the screen turns black. You are performing a standard iPhone 7 reboot. The phone will turn back on and you’re good to go.

How do you fix an iPhone 7 that won’t turn on?

Perform an iPhone 7 soft reset even if the phone seems dead. To do this press and hold BOTH the power (sleep/wake) button and the volume down button at the same time for 10-15 seconds. If the logo appears – your forced restart did the trick.

What do I do if my iPhone screen is unresponsive?

Restart your iPhone or iPad. Make sure your screen is clean and free of any debris or water. Disconnect any Lightning or USB-C accessories. If your screen works after removing an accessory, try using a different outlet, cable, or charger.

How do you unfreeze an iPhone?

An immediate way to unfreeze your iPhone is by performing the hard reset. Hold the “sleep/wake” button on your iPhone and the “Home” button simultaneously for 10 seconds until an Apple logo appears on the screen. The iPhone will restart back to normalcy.

Can black screen of death fix itself?

The solution: You should be patient and wait; you don’t have to press anything and prevent the installation — it can only do harm. Upon completion of the process(it may take for a few hours!), the computer will restart itself and the Windows black screen of death will disappear.

Why does my phone screen go black randomly?

When your phone screen goes black randomly, it may be an indication that something is wrong with your operating system. In that case, a factory reset is often beneficial. … The process is more involved than that of a hard reset but can still be done with moderate ease.

Why does my screen go black randomly?

Bad PSU: The Power Supply Unit is known to be the most common culprit of making your monitor go black. … Video cable: The video cable whether is an HDMI or VGA connecting the monitor to your PC might be broken or damaged. This will usually cause a black screen when it is touched or randomly as well.

How do I reset my iPhone 7 without the screen?

If you own an iPhone 7/7 Plus then here is how to force restart iPhone without a screen.

1. Press on the ‘Power’ and ‘Volume Down’ buttons at the same time and wait for the Apple logo to appear on the screen.
2. When you can see the Apple logo on your iPhone screen, it is the time to release both the buttons.

How do I get my iPhone 7 out of recovery mode without losing data?

For iPhone 7 and later versions

1. Switch off your device by holding the Power button.
2. Hold the Power button and the Volume Down key at the same time for the next 10 seconds.
3. Afterward, let go of the Power button but keep holding the Volume Down key until your phone enters the DFU mode.

Why is my iPhone 7 stuck recovery mode?

The most common reason an iPhone gets stuck in Recovery mode is that a problem occurred during a software update. … Your iPhone shows a black screen with an icon or logo on it that prompts you to connect to a computer. You might need to use a computer with macOS Catalina or iTunes to exit Recovery mode.

How do you fix a stuck Apple iPhone 7?

iPhone 7 and iPhone 7 Plus: Press and hold both the Volume Down button and the Sleep/Wake button. Keep holding the Volume Down button until you see the recovery mode screen. iPhone 6s and earlier: Press and hold both the Sleep/Wake button and the Home button.

Why does my iPhone 7 show the Apple logo but won’t turn on?

Software issues are probably the most common reason for your iPhone being stuck on the Apple logo. Nine times out of ten, software issues are caused by either a failed software update, using an older version of the Apple iOS or having a jailbroken iPhone.

How do you fix a crashed iPhone 7?

If your iPhone screen is frozen or unresponsive, then force it to restart with these steps:

1. Press and hold down the Power button and the Volume Down button simultaneously for about 20 to 30 seconds.
2. Then release both buttons when the Apple logo appears.

How do I restart my phone when the screen isnt working?

Restart your phone

If your phone is frozen with the screen on, hold down the power button for about 30 seconds to restart.

What do you do when your iPhone won’t force restart?

Try to Force Restart iPhone

1. Quickly press and release the Volume Up button.
2. And press and release the Volume Down button.
3. Then press and hold the Side button. Release the Side button when the Apple logo appears.

What happens when a hard reset doesn’t work on iPhone?

Try and Force Restart your iPhone EXACTLY as shown below and see whether that resolves the issue: Press and quickly release Volume UP button. Press and quickly release Volume DOWN button. Press and Hold the SIDE button until an Apple logo appears and then release the Side button (Can take up to 20 seconds.

Why did my iPhone turn off and wont turn back on?

If you can’t restart your iPhone, then make sure it’s charged. You might need to replace the Lightning cable and make sure the power source is working properly. If all else fails, plug it into a computer and see if iTunes recognizes the phone. If it does, try to back it up before you get it serviced or repaired.

Don’t forget to share this post with your friends !