Cleaning consists of mounting a cleaning tape, which the drive winds over the heads and thereby the tape’s surface binds and removes the debris off the heads. A cleaning tape can be used only for a certain number of cleaning cycles that is declared on its cover, before it looses its capacity to clean.
In the same way Are LTO cleaning tapes universal?
Quantum LTO Ultrium Universal Cleaning Cartridges are designed specifically for use in all LTO Ultrium 1, 2, 3, 4, 5, 6, 7, 8 and 9 drives. The Ultrium system is based on the industry’s first open data storage platform.
Subsequently, How do you run a cleaning tape? The procedure to clean a tape drive with a cleaning cartridge is simple. Insert the tape into the drive. The drive will spend 15-30 seconds cleaning the heads and tape path of the drive. When the procedure is complete, the tape will eject.
What is universal cleaning cartridge?
Fujifilm LTO Universal Cleaning Cartridges are equipped with a computer memory chip (just like the data tape). The chip stores various information and it has an embedded code that is recognized by the compatible drive’s firmware.
How do I use Backup Exec cleaning tape?
On the Backup Exec navigation bar, select Devices. Select Robotic Libraries, and then select the robotic library for which you are setting up the cleaning. Click Slots to display the library’s slots in the right pane. Select the slot that contains the cleaning tape.
How do I clean up the tape drive in Symantec Backup Exec 2010?
To clean a stand-alone tape drives, you just put in the cleaning tape and it will automatically eject after the drive is cleaned. For a library, you need to put a cleaning tape into a slot and designated the slot as a cleaning slot in BE. After that, you right-click on the library and select clean.
How do I clean my Veritas NetBackup tape drive?
Solution
- Open the NetBackup Admin Console.
- Expand Media and Device Management > Expand Devices > Click on Robots.
- Right click on the robot you wish to configure a cleaning volume (TLD0) > Inventory Robot.
- Once the Robot Inventory window appears, select the bullet Update volume configuration and then click Advanced Options.
Don’t forget to share this post with your friends !
Discussion about this post