How do I start my Mac in recovery mode?

Reboot your Mac. Hold down Option/Alt-Command-R or Shift-Option/Alt-Command-R to force your Mac to boot into macOS Recovery Mode over the internet. This should boot the Mac into Recovery Mode.

In the same way How do I boot a Mac in Safe Mode?

How do I start a Mac in Safe Mode

1. Start your Mac.
2. Press and hold the Shift key.
3. The Apple logo should appear.
4. When the login window appears release the shift key and log in.
5. You may be required to log in twice if you have FileVault turned on.

Subsequently, Why won’t my Mac go past the loading screen? Shut the Mac down, usually by pressing the power button; Now press the Command, Option, R, P keys for at least 20 seconds (sometimes 30 might produce better results); Your Mac should restart automatically and if it gets past the loading screen then the problem is solved.

How do you force start a MacBook?

Follow these steps.

1. Press and hold the power button on your Mac for at least 10 seconds, then release. …
2. If you see no change on your Mac, press and release the power button normally.
3. If your Mac now turns on but doesn’t finish starting up, follow the steps for when your Mac doesn’t start up all the way.

How do I boot into recovery mode?

Keep holding the volume down button until you see the bootloader options. Now scroll through the various options using the volume down button until you see ‘recovery’ and then press the power button to select it. You’ll now see an Android robot on your screen.

Why is my Mac in recovery mode?

You’ve gone into Mac Recovery Mode because there’s a problem, and that typically means a drive problem. In which case, the first thing you need to do is run Disk Utility. … It typically can’t repair the disk your Mac has currently booted from, but that’s why you’ve booted into this Recovery HD.

How do I start my Mac in Safe Mode without a keyboard?

If Your Mac Has No Keyboard to Boot Up In Safe Mode or You Can’t Use Shift Key

1. Open Terminal remotely or log in to your Mac using SSH to access the command line.
2. Use this Terminal command: sudo nvram boot-args=”-x” …
3. After using safe mode, return to normal startup using this Terminal command:

How do you fix a Mac that won’t boot or gets stuck on the loading bar?

Power your Mac back up. Immediately press and hold these four keys: Option + Command + P + R. Make sure to hold the keys for at least 20 seconds. On some Macs, you may hear a startup sound play twice or the Apple logo appear and reappear twice.

How do I fix my MacBook Pro boot loop?

To fix a stuck Mac loading screen, you need to restart your Mac and press the Command+Option+P+R keys simultaneously while it’s rebooting. Keep pressing the keys until you hear the second chime.

Why is my Mac not responding?

Reboot your Mac

If you can’t Force Quit an unresponsive application, then it’s time for a reboot. … How to reboot a Mac that is not responding: Hold down the power button for several seconds. If that doesn’t work, Press the Control-Command keys down, then press the Power button.

How do you do a hard reboot on a Mac?

Press and hold down the Command (⌘) and Control (Ctrl) keys along with the power button (or the ‌Touch ID‌ / Eject button, depending on the Mac model) until the screen goes blank and the machine restarts.

What do I do if my Mac screen is black and wont turn on?

Press and hold the power button for about 10 seconds. Press and release the power button, then immediately press and hold Command (⌘)-R until you see an Apple logo or other image. If you still see a blank screen after about 20 seconds, contact Apple Support.

How do you hard reset a MacBook pro?

How to Hard Reset MacBook, MacBook Air, or MacBook Pro

1. To force a restart your MacBook, you need to press and hold down the Command (⌘) button, the Control (Ctrl) key, and the power button at the same time.
2. Hold these keys down until your MacBook’s screen goes blank and the computer restarts itself.

Where is the recovery key on a Mac?

Generate a recovery key

1. Go to Settings > [your name] > Password & Security. …
2. Tap Recovery Key.
3. Slide to turn on Recovery Key.
4. Tap Use Recovery Key and enter your device passcode.
5. Write down your recovery key and keep it in a safe place.
6. Confirm your recovery key by entering it on the next screen.

How do I reset my Mac desktop to factory settings?

To reset your Mac, first restart your computer. Then press and hold Command + R until you see the Apple logo. Next, go to Disk Utility > View > View all devices, and choose the top drive. Next, click Erase, fill out the required details, and hit Erase again.

How do I fix a stuck Mac in recovery mode?

Helpful answers

1. Shutdown the computer, wait 30 seconds, restart the computer.
2. Resetting your Mac’s PRAM and NVRAM.
3. Reset the System Management Controller (SMC)
4. Start the computer in Safe Mode, then restart normally. …
5. Repair the disk by booting from the Recovery HD.

How do I stop my Mac from booting in recovery mode?

Press and hold the following buttons: Option, Command, P, and R. Keep the keys pressed until you see the Apple logo appear and disappear for the second time. On older models, you need to hold the keys until you hear the startup sound for the second time.

How do I fix my MacBook Pro in recovery mode?

How to use Internet Recovery to reinstall macOS

1. Shut down your Mac.
2. Hold down Command-Option/Alt-R and press the Power button. …
3. Hold down those keys until you a spinning globe and the message “Starting Internet Recovery. …
4. The message will be replaced with a progress bar. …
5. Wait for the MacOS Utilities screen to appear.

How do I boot into safe mode?

While it’s booting up, hold down the F8 key before the Windows logo appears. A menu will appear. You can then release the F8 key. Use the arrow keys to highlight Safe Mode (or Safe Mode with Networking if you need to use the Internet to solve your problem), then press Enter.

How do you restart a frozen Mac?

Press and hold down the Command (⌘) and Control (Ctrl) keys along with the power button (or the ‌Touch ID‌ / Eject button, depending on the Mac model) until the screen goes blank and the machine restarts.

How do I reboot a Mac?

To restart a Mac computer, you have three choices:

1. Press the power button (or press Control+Eject) and, when a dialog box appears, click the Restart button.
2. Choose the Apple key and then click Restart.
3. Press Control+Command+Eject (or Control+Command+Power button).

How long does it take to reinstall Macos?

Typically, if you have a stock 5400 rpm drive, it takes about 30 – 45 minutes using a USB installer. If you are using the internet recovery route, it can take over an hour, depending on speed of internet etc. If you have a SSD using a USB installer, it typically takes 15 minutes or so.

How do you reset SMC?

Resetting the System Management Controller (SMC)

1. Shut down the computer.
2. Disconnect the MagSafe power adapter from the computer, if it’s connected.
3. Remove the battery.
4. Press and hold the power button for 5 seconds.
5. Release the power button.
6. Reconnect the battery and MagSafe power adapter.

How do you reset P RAM on a Mac?

How to Reset PRAM or NVRAM

1. Power off your Mac.
2. Press your Mac’s power button and then hold these four keys at the same time: ⌘ + option + P + R.
3. Continue holding the keys until your Mac restarts for the second time. On older Macs, the chime will sound upon restart.

Don’t forget to share this post with your friends !