Use the following steps to load paper in the product.
- Raise the input tray. …
- Lower the output tray, and then pull out the tray extender. …
- Slide the paper width guide to its outermost position. …
- Load a stack of plain paper into the input tray, print-side up. …
- Slide the paper width guide snugly against the paper.
In the same way What is WPS on a router?
Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network. …
Subsequently, Why is my printer not grabbing the paper? The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
How do I setup my HP Deskjet 3050 wireless?
Press and hold the “Wireless” button on the printer control panel for at least three seconds, or until the wireless light starts blinking. Press and hold the “WPS” button on your wireless router for several seconds. Your printer will automatically find the wireless network and configure the connection.
Can I scan from HP printer to iPhone?
Get the HP Smart app for Android, Apple iOS and iPadOS, Windows, and Mac to set up and use your HP printer to print, scan, copy, and to manage settings. … Place the printer and the computer or mobile device near the Wi-Fi router.
How do I find my WiFi WPS PIN?
Take note of the router’s WPS PIN on the third item of the Wi-Fi Protected Setup™ screen. Alternatively, you can also find the Linksys router’s PIN at the bottom of your router together with the Serial No. and MAC Address information. IMPORTANT: The router’s PIN may vary according to the device being used.
How do I connect my WiFi to WPS?
How to Connect to Wi-Fi Using the WPS Push Button?
- Check if your wireless router features WPS push button. …
- On the phone, go to [Settings] > [Wi-Fi] and turn it on.
- Tap [Advanced Settings] > [WPS Button Connection].
- Press the WPS connection button on your router to establish a connection.
Does WPS button reset router?
To use WPS function, please push the button for less than 5 seconds, and then the WPS LED will flash; to reset the router, please push the button for at least 10 seconds. … Then release the button and wait the Router to reboot to its factory default settings.
Why is my HP printer not grabbing the paper?
Dust, paper fiber, and other debris might accumulate on the pick rollers and cause paper feed issues. To help prevent paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped). If the other steps in this document fail to resolve the issue, then reset the printer.
How do I change the rollers on my HP printer?
Cover the print cartridge with a sheet of paper. Find the pickup roller. Release the small, white tabs on either side of the pickup roller, and then rotate the pickup roller toward the front of the product. Gently pull the pickup roller up, and then out.
Can’t connect my HP printer to WIFI?
Make sure paper is loaded in the main tray, and then turn on the printer. From the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings. Get the network name and password. Go to Find the wireless network password or PIN to connect an HP printer for more information.
How do I print from my phone to my HP Deskjet 3050?
Print and Scan using HP DJ 3050 Smart app
To print a file, open the HP Smart app a tap Print documents or any other alternatives you wish to pick. Also choose the storage of file. If you don’t have a social media or cloud account, tag on the on-screen prompts. Choose the file to print and Print preview displays.
How do I connect my HP printer to my phone?
Add a printer using Wi-Fi Direct: On your printer, make sure Wi-Fi Direct is turned on. On your mobile device, tap All printers > Add printer, and then tap HP Print Service or HP Inc. Tap Directly to the Printer, select the name of your printer with DIRECT in the name, and then tap OK.
How do I connect my iPhone to my HP printer?
On your mobile device, open the Wi-Fi network menu, and then select your printer with DIRECT in the name. If prompted, enter the Wi-Fi Direct password, and then tap Join. Open the item you want to print, and then select the option to Print. Select AirPrint, if prompted.
How do I get my iPhone to connect to my printer?
Print with AirPrint
- Open the app that you want to print from.
- To find the print option, tap the app’s share icon — or. …
- Scroll down and tap. …
- Tap Select Printer and choose an AirPrint-enabled printer.
- Choose the number of copies or other options, like which pages you want to print.
- Tap Print in the upper-right corner.
Where is the 8 digit PIN on a HP printer?
Press the ‘Settings’ option and select the Wireless button. Press the Wi-Fi Protected Setup. Now Follow the instructions appearing on the HP Printer screen carefully. Click on the ‘WPS PIN’ option and a 8 digit PIN appears on the HP Printer screen.
Where is the 8 digit PIN on my router?
Type in 8-digit PIN code, you can find it on the label at the bottom of the device. Click Next, the router will set a WPA2-Personal password for your wireless network automatically. You need remember the password. It is the key of your wireless network.
How do I connect my laptop wirelessly to WPS?
One easy way is to click or tap the wireless icon from the system tray. The list that pops up shows all the Wi-Fi networks available near you. Find the wireless network that you want to connect through WPS and click or tap on its name. Then, press Connect.
What happens when you hold the WPS button on a router?
The WPS button simplifies the connection process
Press the WPS button on your router to turn on the discovery of new devices. Then, go to your device and select the network you want to connect to. … WPS automatically sends the network password, and these devices remember it for future use.
What happens if I press the WiFi button on my router?
When you press the button, the router begins looking for compatible devices. If it finds any devices looking for a WPS-enabled router to connect to, the two will automatically pair up. If nothing connects to the router in approximately two minutes, the router stops looking.
Do you have to hold the WPS button?
The Wi-Fi Protected Setup (WPS) button is an alternate way of connecting a WPS-supported device to a wireless router. … Note: You will need to press and hold the WPS button on the wireless router for about 2-3 seconds. After a short period of time, your device and the wireless router will be connected.
What is a roller in a printer?
Rubber printer rollers grab the sheets of paper in the paper tray of your printer and feed them through the machine. … Dirty printer rollers leave smudges and streaks on your prints, and bits of paper can cause your rollers to jam. Fortunately, cleaning printer rollers is a fairly easy task to complete.
What is E4 on HP printer?
During a print job, the printer stops feeding pages, an E4 error displays, and the Resume light blinks. This indicates that paper might be jammed inside the printer. note: Paper jams can be real or false. The printer might report a paper jam even when there is no jammed paper.
Don’t forget to share this post with your friends !
Discussion about this post