When you are having printing issues, a faulty USB cable may not be the obvious place to look for a problem. If the printer works and then doesn’t work when you happen to touch or move the cable, it should be obvious that a bad cable is to blame.
Also, Can I print using a USB cable?
Connect one end of the USB cable to the printer and the other end to the USB OTG. Then connect the other end of the USB OTG to your Android phone. A plugin should pop-up on your Android phone. Tap “OK” to activate it for printing.
Beside above How do I know if my USB cable is faulty? How to Test a USB Cable
- Check the USB cable for any tears or fraying. …
- Plug the PC end of the USB cable into any of your PC’s USB ports. …
- Connect the other end of the USB cable to a compliant USB device that has the appropriate input for the cable. …
- Power on your PC. …
- Check to see if the device works as it normally would.
How do I test a USB printer cable?
Unplug the USB cable from your computer if the device was not recognized after a few minutes. Connect the USB cable to another USB slot on the back of your computer. If the message appears this time then you have a faulty USB jack (the first slot you tried to connect to) and the cable is fine.
Why won’t my USB printer connect?
Remove any devices connected between the printer and computer (IE:USB Hub). Reseat the USB cable connecting the printer and computer by unplugging both ends, and plugging them back in. … Test by connecting the printer via USB to another computer. If that fails, uninstall the printer driver completely.
How do I connect my printer to a USB cable?
Add a Local Printer
- Connect the printer to your computer using the USB cable and turn it on.
- Open the Settings app from the Start menu.
- Click Devices.
- Click Add a printer or scanner.
- If Windows detects your printer, click on the name of the printer and follow the on-screen instructions to finish the installation.
Can you test a USB cable?
To find out which cable is which, you can use the “Is it me or is it USB” USB cable tester. Just plug one end of a cable into the USB-A port and the other end into the micro USB-B port. Either two or four LEDs will light up, signifying whether the data wires are present.
When should I replace my charging cable?
If you notice that the cord is bent or fraying, it is probably time to replace it. Damage is not always visible, though, so try plugging the cable into a USB port on a computer rather than using the wall adapter to determine the source of the problem.
How do I fix my USB ports randomly stop working?
Method 3: Reset the USB controllers.
- Disconnect all USB devices.
- Click Start, type devmgmt. …
- Double-click Universal Serial Bus controllers in Device Manager.
- Right-click on the Generic USB Hub, click Uninstall, and then click OK.
- Repeat step 3 to uninstall all items under Universal Serial Bus controllers.
Can I connect a wireless printer with a USB cable?
Note: The printer can be connected by a USB cable to a computer and also be connected to a wireless network. Both USB and wireless connections can be active and used at the same time.
Why is my printer not responding to my computer?
If your printer fails to respond to a job: Check that all printer cables are connected properly and be sure that the printer is turned on. … Cancel all documents and try printing again. If your printer is attached by USB port, you may try connecting to other USB ports.
Why won’t my printer recognize my computer?
If the printer is not responding even after you’ve plugged it in, you can try a few things: Restart the printer and try again. Unplug the printer from an outlet. … Check if the printer is properly set up or connected to your computer’s system.
Do I need USB cable for wireless printer?
You don’t need to go hunting for a USB cable to connect to a printer, and you don’t need a printer for every PC. Set up the printer to connect to your existing Wi-Fi network, and as long as you are on the same network, you will be able to print. …
How do I test USB ports?
Use the Device Manager to determine if your computer has USB 1.1, 2.0, or 3.0 ports:
- Open the Device Manager.
- In the “Device Manager” window, click the + (plus sign) next to Universal Serial Bus controllers. You will see a list of the USB ports installed on your computer.
How do I test USB cable speed?
Here are some ways to determine the operating speed of the USB device:
- Make sure that you have USB 3.0-capable hardware.
- View device information in Device Manager.
- Look for Windows 8 UI messages.
- Use USBView to view the bus speed.
- Determine the bus speed programmatically.
- Troubleshooting.
Can I change my charger cable?
So if your charging cable has got even a slightest of worn and torn on it, then its best to get it replaced as instantly as possible.
Do USB Chargers wear out?
Yes, USB Chargers will eventually wear out. Here’s how to prolong the life of your charger: Pay attention when plugging in the USB charger and disconnecting. Do not bend any wiring.
Can USB ports be replaced?
If something goes wrong with one of your USB ports, or if you simply need more connections, it isn’t too difficult to replace the part on your own so long as you have a little mechanical expertise.
How do you check if all USB ports are working?
To scan for hardware changes, follow these steps:
- Click Start, and then click Run. …
- Type devmgmt. …
- In Device Manager, click your computer so that it is highlighted.
- Click Action, and then click Scan for hardware changes.
- Check the USB device to see whether it is working.
Why do my USB ports keep disconnecting?
It can be that your USB device happens to be faulty or the USB port you’re plugging your devices into are failing. To rule out this as a possibility: Connect your USB devices to a different computer. If it’s working properly on the other computer, then your USB device is most likely at fault.
Why is printer not connecting to WIFI?
Make sure the printer is on or that it has power. Connect your printer to your computer or other device. Check the printer’s toner and paper, plus the printer queue. … In this case, reconnect your device to the network, reconfigure security settings to include printers, and/or install updated drivers.
Why is my printer connected but not printing?
My printer won’t print
Make sure there is paper in the tray(s), check the ink or toner cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi. And if it is a network or wireless printer, try using a USB cable instead.
How do I connect my printer to the USB port?
Connect the printer end of the USB cable to the USB port on the side of the printer. *The location of the USB port differs depending on your printer. Connect the other end of the USB cable to the USB port on the computer. Turn on the printer by pressing the Power button.
Which is better wireless or wired printer?
Wireless printers give you the benefits of a wired network printer along with the ability to place the device anywhere it can detect a solid Wi-Fi signal, giving you the most flexibility when it comes to setting up your office devices but also the least reliability of the three connection methods.
How do I connect my printer to a USB cable?
How do I connect the printer and my computer via USB cable?
- Make sure that the printer is turned off before connecting the USB cable.
- Connect the printer end of the USB cable to the USB port on the side of the printer. …
- Connect the other end of the USB cable to the USB port on the computer.
Do wireless printers need Ethernet?
Most wireless routers provide physical connection points for wired network devices such as computers and printers. A special cable called an Ethernet cable is used. … All devices that connect to your wireless router, whether wirelessly or through an Ethernet cable, have access to the same network.
Discussion about this post