The ATEM Mini Pro and ATEM Mini Extreme models include a professional multiview that lets you see all video inputs, preview and program on a single HDMI television or monitor! Simply select M/V on the front panel video output control buttons to select multiview!
Then, How do I use my ATEM Mini Pro as a webcam?
Can OBS control Atem mini? The ATM mini can be used as a camera switcher while doing the rest of the show in OBS. This complements OBS well since sub switching is a feature that is often requested. The gist is that you hook up the cameras for your show to the ATEM mini, and embed the webcam output of the ATEM mini into an OBS scene.
Keeping this in view, How do I connect my ATEM Mini Pro to the Internet?
How do I zoom with ATEM Mini Pro?
How do I connect my Atem mini to my computer? Just connect the USB to a Mac or PC and run the software, as it uses the same USB connection that the ATEM Mini’s webcam output uses. You can also use ATEM Software Control via ethernet if you have more than one operator working on the same job at the same time.
Does ATEM Mini Pro support 4K? You cannot input a 4K or UHD source into the ATEM Mini Pro. The HDMI output is a true “aux” output so you can clean switch each HDMI input or program to this output.
Can you record with ATEM Mini? The ATEM Mini Pro, with its built-in streaming and recording, is a perfect way to go live YouTube, Facebook, and Twitch. You don’t even need to do too much to make it happen, just attached a camera and an audio source, configure your destination, and start streaming.
What does Atem stand for Blackmagic?
I checked with the ATEM product manager and ATEM is just a family name of switcher products. ATEM is based on the name of the Egyptian god, Atum.
Can you stream directly from ATEM Mini Pro? To live stream, ATEM Mini models have a USB output that works like a webcam for streaming software, or ATEM Mini Pro and Extreme can live stream direct via Ethernet.
Which cameras work with ATEM Mini?
Three are Studio Camera models; the Studio Camera HD, Studio Camera 4K and Micro Studio Camera 4K. The fourth is the Ursa Mini. The Studio Camera HD and Studio Camera 4K, both have the capability of sending control signals, audio, video, talkback, program and tally over dual SDI cables or over fiber.
How do I connect my OBS to Atem mini? Make sure the Blackmagic ATEM Mini (or your live streaming switcher) is turned on and connected. In OBS, select the Add icon under Sources then Video Capture Device to add the webcam to the scene. Enter a name for the webcam (e.g., Blackmagic) then select OK.
How do I get audio from Atem to OBS?
How do I get audio from Atem mini to OBS?
I have to go into the ATEM Mini settings in OBS and Uncheck “Custom Audio Device”, then say OK, then go back in and recheck “Custom Audio Device”, then say OK to get the audio to work again.
Can Atem mini pro stream over WiFi? If you are streaming on ATEM Mini Pro, also set your computer to share its internet. Now you get both control and streaming via the single Ethernet cable. This provides amazing mobility as you can connect your computer to the internet using wireless connections such as WiFi or even 4G and 5G tethered phones!
How do I control my Atem mini remotely?
What is Atem Mini Pro IP address?
By default, the ATEM processor chassis is set to a fixed IP address of 192.168. 10.240, and the ATEM Broadcast Panel is set to fixed IP of 192.168. 10.10, so when connected directly they should communicate without any problems.
How do I use Blackmagic ATEM Mini Pro ISO?
What is streaming Bridge?
The ATEM Streaming Bridge is a video converter that lets customers receive a H. 264 stream from any ATEM Mini Pro and convert it back to SDI and HDMI video. This means customers can send video to remote locations around their local Ethernet network, or via the internet globally.
How do I zoom in black magic?
Discussion about this post