In computer or memory technology, a strobe is a signal that is sent that validates data or other signals on adjacent parallel lines. In memory technology, the CAS (column address strobe) and RAS ( row address strobe ) signals are used to tell a dynamic RAM that an address is a column or row address.
In the same way What does a stroboscope do?
The stroboscope is an intense, high speed light source used for visual analysis of objects in periodic motion and for high speed photography. Objects in rapid periodic motion can be studied by using the stroboscope to produce an optical illusion of stopped or slowed motion.
Subsequently, What is strobe explain in detail? Strobe Control. The strobe control method of asynchronous data transfer employs a single control line to time each transfer. The strobe may be activated by either the source or the destination unit. … The strobe is a single line that informs the destination unit when a valid data word is available in the bus.
What is Strobe data?
Data strobe is the clock signal for the data lines. Each data byte has their own strobe. It is bidirectional signal. It is transmitted by the same component as the data signals. By the memory controller on write and the by the memory on read commands.
What is strobe pin and its functionality?
This device selects one of the eight binary Data Inputs, as determined by the Address Inputs. The Strobe pin must be at a low level for the selected data to appear at the outputs. If Strobe is high, the Y output is forced to a low level and the Y output is forced to a high level.
Which is true about stroboscope?
3. The system is automatically statically balanced.
…
Q. | Which of the following statements is true about stroboscope? |
---|---|
C. | Stroboscope uses electromagnetic radiations to measure frequency |
D. | All of the above |
Answer» a. Stroboscope is non-contact type frequency instrument |
Who invented the strobe?
Harold Edgerton, a professor of electrical engineering at the Massachusetts Institute of Technology, invented the strobe flash in the nineteen-thirties. Photographers could use the device to stop the appearance of movement in their images, and it changed the course of photography.
What is strobe and handshaking?
Strobe based communication and handshake based communication are asynchronous data transmission. … The handshake can either be initiated by a source or a destination. THE DIFFERENCE BETWEEN THE TWO. Strobe uses a single control line signal to time each transfer whereas handshake uses two control signals.
What is strobe and handshaking explain in detail?
Handshaking usually uses two additional hardware lines, one is called “strobe” and the other is called “acknowledge”. The sender provides the signal to the strobe line and the receiver provides the signal to the acknowledge line. Handshaking can be used in both parallel data transfer and serial data transfer.
What is strobe control explain?
The strobe control technique of asynchronous data transfer operates a single control line to time each transfer. The strobe can be activated by either the source or the destination unit. … The strobe is a single line that instructs the destination unit when an accurate data word is accessible in the bus.
What is a strobe in FPGA?
Data strobe encoding (or D/S encoding) is an encoding scheme for transmitting data in digital circuits. It uses two signal lines (e.g. wires in a cable or traces on a printed circuit board), Data and Strobe. … This allows for easy clock recovery with a good jitter tolerance by XORing the two signal line values.
Which type of monitoring system uses stroboscope?
Stroboscope is used for the measurement of _________________?
…
Q. | Which type of monitoring system uses stroboscope to measure speed of the machine? |
---|---|
B. |
Basic condition monitoring system |
What is the use of stroboscope technology Mcq?
Explanation: Stroboscope technology is used for optically freezing the motion of reciprocating or rotating parts.
Which of the following instruments measure velocity of a vibrating body?
4. Vibrometer • A Vibrometer or seismometer is used for measuring displacement of a vibrating body. Basically it is design under the condition of low natural frequency due to this reason it is also called as low frequency transducer.
Are strobe lights illegal?
It is legal for anyone to buy car strobe lights for their private vehicles. However, the laws surrounding the usage of strobe lights for your personal vehicle vary greatly state by state. By and large, in most states, car strobe lights are not allowed on public roads, but are permitted on private property.
Are strobe lights safe?
When using stroboscopic lighting effects, a key concern must be safety. A proportion of people with photo-sensitive epilepsy may be affected by strobe lighting, and the effect may also produce undesirable sensations amongst the general population if used without due regard. Disturbed vision leading to trips or falls.
When was the strobe light invented?
The electronic strobe light stroboscope was invented in 1931, when Harold Eugene Edgerton (“Doc” Edgerton) employed a flashing lamp to study machine parts in motion.
What are handshaking signals?
Signals transmitted back and forth over a communications network in order to establish a valid connection between two stations. … A “software handshake” sends codes such as “synchronize” (SYN) and “acknowledge” (ACK) in a TCP/IP transmission.
What is strobe in multiplexer?
A multiplexer is a circuit with many inputs but only one output. Pin 9 (STROBE) is an input signal that disables or enables the multiplexer. …
What is the definition of handshaking?
noun. a gripping and shaking of right hands by two individuals, as to symbolize greeting, congratulation, agreement, or farewell. Also handshaking.
What is handshaking discuss in detail?
In communication, handshaking is the automated process for negotiation of setting up a communication channel between entities. Handshaking occurs before the transfer of data or any other communication and just after the establishment of the physical channel between the two entities.
What is strobe pulse?
[′strōb ‚pəls] (electronics) Pulse of duration less than the time period of a recurrent phenomenon used for making a close investigation of that phenomenon; the frequency of the strobe pulse bears a simple relation to that of the phenomenon, and the relative timing is usually adjustable.
What is handshake based communication?
In telecommunications, a handshake is an automated process of negotiation between two participants (example “Alice and Bob”) through the exchange of information that establishes the protocols of a communication link at the start of the communication, before full communication begins. …
Don’t forget to share this post with your friends !
Discussion about this post